unisonic technologies co., ltd 80n08 power mosfet www.unisonic.com.tw 1 of 4 copyright ? 2014 unisonic technologies co., ltd qw-r502-468.f 80 a , 80v n-channel power mosfet ? description the utc 80n08 is an n-channel mosfet using utc advanced technology. it can be used in applications, such as power supply (secondary synchronous rectification), industrial and primary switch etc. ? features * trench fet power mosfets technology ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 80n08l-t47-t 80N08G-T47-T to-247 g d s tube 80n08l-ta3-t 80n08g-ta3-t to-220 g d s tube 80n08l-tq2-t 80n08g-tq2-t to-263 g d s tube 80n08l-tq2-r 80n08g-tq2-r to-263 g d s tape reel note: pin assignment: g: gate d: drain s: source
80n08 power mosfet unisonic technologies co., ltd 2 of 4 www.unisonic.com.tw qw-r502-468.f ? marking information package marking to-247 to-220 to-263
80n08 power mosfet unisonic technologies co., ltd 3 of 4 www.unisonic.com.tw qw-r502-468.f ? absolute maximum ratings (t j = 25 c, unless otherwise specified) parameter symbol ratings unit gate source voltage v gs 20 v continuous drain current i d 80 a pulsed drain current i dm 320 a avalanche energy, single pulse e as 810 mj power dissipation to-247 p d 300 w to-220/to-263 250 w junction temperature t j +150 c storage temperature t stg -55 ~ +150 c note: absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. l=0.1mh, i as =80a, v dd =25v, r g =20 ? , starting t j =25c. ? thermal data parameter symbol ratings unit junction to ambient to-247 ja 30 c/w to-220/to-263 62 junction to case to-247 jc 0.42 c/w to-220/to-263 0.5 ? electrical characteristics (t j =25c, unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss i d =1ma, v gs =0v 80 v drain-source leakage current i dss v ds =80v, v gs =0v, t j =25c 0.01 1 a gate-source leakage current i gss v ds =0v, v gs =20v 1 100 na on characteristics gate threshold voltage v gs ( th ) v ds =v gs , i d =250a 2.1 3.0 4.0 v static drain-source on-state resistance r ds ( on ) v gs =10v, i d =80a 12 m ? dynamic parameters input capacitance c iss v gs =0v, v ds =25v, f=1.0mhz 4700 pf output capacitance c oss 1260 pf reverse transfer capacitance c rss 580 pf switching parameters total gate charge q g 144 180 nc gate to source charge q gs 25 37 nc gate to drain charge q gd 69 116 nc turn-on delay time t d ( on ) v dd =40v, r g =2.2 ? i d =80a, v gs =10v 26 ns rise time t r 50 ns turn-off delay time t d ( off ) 61 ns fall-time t f 30 ns source- drain diode ratings and characteristics maximum body-diode continuous current i s 80 a pulsed current i sm 320 drain-source diode forward voltage v sd i sd =80a 0.9 1.3 v reverse recovery time t rr i f = i s , di f /dt=100a/s v r =40v 110 140 ns reverse recovery charge q rr 470 590 nc note: 1. defined by design. not subject to production test. 2. qualified at -20v and +20v.
80n08 power mosfet unisonic technologies co., ltd 4 of 4 www.unisonic.com.tw qw-r502-468.f ? typical characteristics drain current vs. drain-source breakdown voltage drain current, i d (a) drain-source breakdown voltage, bv dss (v) 0.5 0 drain current vs. gate threshold voltage drain current, i d (a) gate threshold voltage, v th (v) 1.5 2 3 12.5 0 50 100 150 200 250 300 020 60 100120 40 0 50 100 150 200 250 300 80 drai n -source o n -state resistanc e characteristics drain current, i d (a) drain to source voltage, v ds (mv) 0 6 14 20 0 50 100 200 250 2 8 12 16 300 0 drain current vs. source to drain voltage source to drain voltage, v sd (v) drain current, i d (a) 0.2 0.4 0.6 0.8 1.0 0 2 4 6 8 12 10 v gs =10v, i d =20a 4 10 18 150 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
